A hundred years of pavilion in the decades of Colt on the modern style for the original is true, has become a brand logo function. From our archives, here is a hands-on review of the new Breitling Colt Replica Watches.


Breitling improved its entry-level Colt series last year and introduced the original series in the 1980s. Like Chronomat and Navitimer, Colt is considered a military watch, emphasizing reliability and readability. Its 24-hour scale, pilots style dial and extensive one-way bezel have defined a clear appearance of Cheap Breitling Replica. The new collection is real, the original right movement. Most of the new models include quartz caliber, the first appearance in the Colt, the watch world dominated. We tested the only mechanical version with automatic ETA caliber. The ETA campaign was also used in the original series.
The new Colt Automatic is similar to Colt Superocean, which debuted in the mid-1990s and retained several years of collection. The new Colt replicates the old model of the rotatable crown with both sides of the protector, the pilot-style Arabic numerals and a wide unidirectional bezel, with a quarter of a quarter with a notch and raised cursors The These cursors improve the grip of the baffle, even with gloves can easily rotate. They have become a feature of Breitling Replica Watches.


In the new Colt, these marks are accurately carved into satin-trimmed borders, with the slopes tilted downward toward the outer edge. The baffle clicks 120 steps compared to the 60 notches on the Coulter Super Ocean baffle, although the additional steps are not necessary for diving start time settings. The new Colt automaton also repeats Superocean’s 24-hour scale and a rare 1/100-hour scale, known as the “Aerospace Centennial Scale”.
Colt Auto’s 200m water resistance is lower than the early model of 1000 meters depth level, but still for the divers’s watch provides a lot of water resistance. A solid stainless steel case, double-sided insulated back helps keep the Breitling Replica intact dive. Professional III stainless steel bracelet with safety lock and folding buckle, hinge open on one side. Bracelet, professional III, can be adjusted in the buckle, or by removing the threaded connection at both ends of the buckle. The watch can also be worn on a leather strap or on an Ocean Racer or Diver Pro rubber strap.


With the eyes of Breitling Caliber 17, the new Colt ETA 2824-2 is only moderately decorated, but has a timer certification. In our electronic timing test, Colt’s average rate is almost no deviation, the host is full of wounds and run for 24 hours. On the wrist, the Cheap Breitling Replica jogged for 1 second. This slight hysteresis continues day after day, but the deviation of 1 second falls within the time tolerance. It is worth noting that the watch runs 24 hours later, the dial rate and the crown rate between the existence of a big difference. We also note that in a day’s time, the suspension position is reduced by nearly 60 degrees. This is a sharp decline, but the average level is not affected, in general, commendable.


Minutes and seconds are shown on railroad tracks. The slender second hand with arrows has the same length as the straight line and the Breitling Replica Watches minute hand. The tip of the hour hand extends far enough to reach the inner edge of the hour index at 6 o’clock and 9 o’clock, which is larger than the rest. The hour and minute hands on the bezel, the index and the direction point will be bright green in the dark. The arrows on the second hand are prompted by the skull so that when the glowing time indicator is swept, the green light is allowed to illuminate.

Manufacturer: Breitling AG, Schlachthausstrasse 2, CH-2540, Grenchen, Switzerland

Reference number: A1738811/C906/173A

Functions: Hours, minutes, central seconds, date, 24-hour and 1/100s-hour scale, rotating bezel

Movement: Automatic, Breitling Caliber 17 based on the ETA 2824-2, COSC-       certified, 49-hour power reserve, Glucydur balance, frequency of 28,800 vph, Etachron fine adjustment, Incabloc shock absorption, 25 rubies, diameter = 25.6 mm, height = 4.6 mm

Case: Stainless steel, sapphire crystal with nonreflective coating on both sides, solid caseback, water resistant to 200 m

Bracelet and clasp: Stainless-steel Professional III bracelet, folding clasp with safety catch